Ultrabroadband plasmon driving selective photoreforming of methanol under ambient conditions.

Liquid methanol has the potential to be the hydrogen energy carrier and storage medium for the future green economy. However, there are still many challenges before zero-emission, affordable molecular H2 can be extracted from methanol with high performance. Here, we present noble-metal-free Cu-WC/W plasmonic nanohybrids which exhibit unsurpassed solar H2 extraction efficiency from pure methanol of 2,176.7 µmol g-1 h-1 at room temperature and normal pressure. Macro-to-micro experiments and simulations unveil that local reaction microenvironments are generated by the coperturbation of WC/W's lattice strain and infrared-plasmonic electric field. It enables spontaneous but selective zero-emission reaction pathways. Such microenvironments are found to be highly cooperative with solar-broadband-plasmon-excited charge carriers flowing from Cu to WC surfaces for efficient stable CH3OH plasmonic reforming with C3-dominated liquid products and 100% selective gaseous H2. Such high efficiency, without any COx emission, can be sustained for over a thousand-hour operation without obvious degradation.

Orbital-Hybridization-Driven Charge Density Wave Transition in CsV3 Sb5 Kagome Superconductor.

Owing to its inherent non-trivial geometry, the unique structural motif of the recently discovered kagome topological superconductor AV3 Sb5 (A = K, Rb, Cs) is an ideal host of diverse topologically non-trivial phenomena, including giant anomalous Hall conductivity, topological charge order, charge density wave (CDW), and unconventional superconductivity. Despite possessing a normal-state CDW order in the form of topological chiral charge order and diverse superconducting gaps structures, it remains unclear how fundamental atomic-level properties and many-body effects including Fermi surface nesting, electron-phonon coupling, and orbital hybridization contribute to these symmetry-breaking phenomena. Here, the direct participation of the V3d-Sb5p orbital hybridization in mediating the CDW phase transition in CsV3 Sb5 is reported. The combination of temperature-dependent X-ray absorption and first-principles studies clearly indicates the inverse Star-of-David structure as the preferred reconstruction in the low-temperature CDW phase. The results highlight the critical role that Sb orbitals play and establish orbital hybridization as the direct mediator of the CDW states and structural transition dynamics in kagome unconventional superconductors. This is a significant step toward the fundamental understanding and control of the emerging correlated phases from the kagome lattice through the orbital interactions and provides promising approaches to novel regimes in unconventional orders and topology.

Spontaneous Lithiation of Binary Oxides during Epitaxial Growth on LiCoO2.

Epitaxial growth is a powerful tool for synthesizing heterostructures and integrating multiple functionalities. However, interfacial mixing can readily occur and significantly modify the properties of layered structures, particularly for those containing energy storage materials with smaller cations. Here, we show a two-step sequence involving the growth of an epitaxial LiCoO2 cathode layer followed by the deposition of a binary transition metal oxide. Orientation-controlled epitaxial synthesis of the model solid-state-electrolyte Li2WO4 and anode material Li4Ti5O12 occurs as WO3 and TiO2 nucleate and react with Li ions from the underlying cathode. We demonstrate that this lithiation-assisted epitaxy approach can be used for energy materials discovery and exploring different combinations of epitaxial interfaces that can serve as well-defined model systems for mechanistic studies of energy storage and conversion processes.

Superconductivity in infinite-layer nickelate La1-xCaxNiO2 thin films.

We report the observation of superconductivity in infinite-layer Ca-doped LaNiO2 (La1-xCaxNiO2) thin films and construct their phase diagram. Unlike the metal-insulator transition in Nd- and Pr-based nickelates, the undoped and underdoped La1-xCaxNiO2 thin films are entirely insulating from 300 K down to 2 K. A superconducting dome is observed at 0.15 < x < 0.3 with weakly insulating behavior at the overdoped regime. Moreover, the sign of the Hall coefficient RH changes at low temperature for samples with a higher doping level. However, distinct from the Nd- and Pr-based nickelates, the RH-sign-change temperature remains at around 35 K as the doping increases, which begs further theoretical and experimental investigation to reveal the role of the 4f orbital to the (multi)band nature of the superconducting nickelates. Our results also emphasize a notable role of lattice correlation on the multiband structures of the infinite-layer nickelates.

Room-Temperature Ferromagnetism at an Oxide-Nitride Interface.

Heterointerfaces have led to the discovery of novel electronic and magnetic states because of their strongly entangled electronic degrees of freedom. Single-phase chromium compounds always exhibit antiferromagnetism following the prediction of the Goodenough-Kanamori rules. So far, exchange coupling between chromium ions via heteroanions has not been explored and the associated quantum states are unknown. Here, we report the successful epitaxial synthesis and characterization of chromium oxide (Cr_{2}O_{3})-chromium nitride (CrN) superlattices. Room-temperature ferromagnetic spin ordering is achieved at the interfaces between these two antiferromagnets, and the magnitude of the effect decays with increasing layer thickness. First-principles calculations indicate that robust ferromagnetic spin interaction between Cr^{3+} ions via anion-hybridization across the interface yields the lowest total energy. This work opens the door to fundamental understanding of the unexpected and exceptional properties of oxide-nitride interfaces and provides access to hidden phases at low-dimensional quantum heterostructures.

Realizing Two-Dimensional Supramolecular Arrays of a Spin Molecule via Halogen Bonding.

Well-ordered spin arrays are desirable for next-generation molecule-based magnetic devices, yet their synthetic method remains a challenging task. Herein, we demonstrate the realization of two-dimensional supramolecular spin arrays on surfaces via halogen-bonding molecular self-assembly. A bromine-terminated perchlorotriphenylmethyl radical with net carbon spin was synthesized and deposited on Au(111) to achieve two-dimensional supramolecular spin arrays. By taking advantage of the diversity of halogen bonds, five supramolecular spin arrays form and are probed by low-temperature scanning tunneling microscopy at the single-molecule level. First-principles calculations verify that the formation of three distinct types of halogen bonds can be used to tailor supramolecular spin arrays via molecular coverage and annealing temperature. Our work suggests that supramolecular self-assembly can be a promising method to engineer two-dimensional molecular spin arrays.

Recent developments in 2D transition metal dichalcogenides: phase transition and applications of the (quasi-)metallic phases.

The advent of two-dimensional transition metal dichalcogenides (2D-TMDs) has led to an extensive amount of interest amongst scientists and engineers alike and an intensive amount of research has brought about major breakthroughs in the electronic and optical properties of 2D materials. This in turn has generated considerable interest in novel device applications. With the polymorphic structural features of 2D-TMDs, this class of materials can exhibit both semiconducting and metallic (quasi-metallic) properties in their respective phases. This polymorphic property further increases the interest in 2D-TMDs both in fundamental research and for their potential utilization in novel high-performance device applications. In this review, we highlight the unique structural properties of few-layer and monolayer TMDs in the metallic 1T- and quasi-metallic 1T'-phases, and how these phases dictate their electronic and optical properties. An overview of the semiconducting-to-(quasi)-metallic phase transition of 2D-TMD systems will be covered along with a discussion on the phase transition mechanisms. The current development in the applications of (quasi)-metallic 2D-TMDs will be presented ranging from high-performance electronic and optoelectronic devices to energy storage, catalysis, piezoelectric and thermoelectric devices, and topological insulator and neuromorphic computing applications. We conclude our review by highlighting the challenges confronting the utilization of TMD-based systems and projecting the future developmental trends with an outlook of the progress needed to propel this exciting field forward.

A Barium Titanate-on-Oxide Insulator Optoelectronics Platform.

Electro-optic modulators are among the most important building blocks in optical communication networks. Lithium niobate, for example, has traditionally been widely used to fabricate high-speed optical modulators due to its large Pockels effect. Another material, barium titanate, nominally has a 50 times stronger r-parameter and would ordinarily be a more attractive material choice for such modulators or other applications. In practice, barium titanate thin films for optical waveguide devices are usually grown on magnesium oxide due to its low refractive index, allowing vertical mode confinement. However, the crystal quality is normally degraded. Here, a group of scandate-based substrates with small lattice mismatch and low refractive index compared to that of barium titanate is identified, thus concurrently satisfying high crystal quality and vertical optical mode confinement. This work provides a platform for nonlinear on-chip optoelectronics and can be promising for waveguide-based optical devices such as Mach-Zehnder modulators, wavelength division multiplexing, and quantum optics-on-chip.

Impurity-Induced Emission in Re-Doped WS2 Monolayers.

Impurity doping is a viable route toward achieving desired subgap optical response in semiconductors. In strongly excitonic two-dimensional (2D) semiconductors such as transition metal dichalcogenides (TMDs), impurities are expected to result in bound-exciton emission. However, doped TMDs often exhibit a broad Stokes-shifted emission without characteristic features, hampering strategic materials engineering. Here we report observation of a well-defined impurity-induced emission in monolayer WS2 substitutionally doped with rhenium (Re), which is an electron donor. The emission exhibits characteristics of localized states and dominates the spectrum up to 200 K. Gate dependence reveals that neutral impurity centers are responsible for the observed emission. Using GW-Bethe-Salpeter equation (GW-BSE) calculations, we attribute the emission to transitions between spin-split upper Re band and valence band edge.

Incorporation of Ti in epitaxial Fe2TiO4thin films.

The titanomagnetites (Fe2-xTixO4,x⩽ 1) are a family of reducible spinel-structure oxides of interest for their favorable magnetic, catalytic, and electrical transport properties. To understand the stability of the system during low temperature deposition, epitaxial thin films of Fe2TiO4were deposited by molecular beam epitaxy (MBE) on MgO(001) at 250-375 °C. The homogeneous incorporation of Ti, Fe valence state, and film morphology were all found to be strongly dependent on the oxidation conditions at the low substrate temperatures employed. More oxidizing conditions led to phase separation into epitaxial, faceted Fe3O4and rutile TiO2. Less oxidizing conditions resulted in polycrystalline films that exhibited Ti segregation to the film surface, as well as mixed Fe valence (Fe3+, Fe2+, Fe0). A narrow window of intermediate oxygen partial pressure during deposition yielded nearly homogeneous Ti incorporation and a large fraction of Fe2+. However, these films were poorly crystallized, and no occupation of tetrahedral sites in the spinel lattice by Fe2+was detected by x-ray magnetic circular dichroism at the Fe L-edge. After vacuum annealing, a small fraction of Fe2+was found to occupy tetrahedral sites. Comparison of these results with previous work suggests that the low temperature deposition conditions imposed by use of MgO substrates limits the incorporation of Ti into the spinel lattice. This work suggests a path towards obtaining stoichiometric, well-crystallized Fe2TiO4by MBE by utilizing high substrate temperature and low oxygen partial pressure during deposition on thermally stable substrates.

Spontaneous phase segregation of Sr2NiO3 and SrNi2O3 during SrNiO3 heteroepitaxy.

Recent discovery of superconductivity in Nd0.8Sr0.2NiO2 motivates the synthesis of other nickelates for providing insights into the origin of high-temperature superconductivity. However, the synthesis of stoichiometric R 1-x Sr x NiO3 thin films over a range of x has proven challenging. Moreover, little is known about the structures and properties of the end member SrNiO3 Here, we show that spontaneous phase segregation occurs while depositing SrNiO3 thin films on perovskite oxide substrates by molecular beam epitaxy. Two coexisting oxygen-deficient Ruddlesden-Popper phases, Sr2NiO3 and SrNi2O3, are formed to balance the stoichiometry and stabilize the energetically preferred Ni2+ cation. Our study sheds light on an unusual oxide thin-film nucleation process driven by the instability in perovskite structured SrNiO3 and the tendency of transition metal cations to form their most stable valence (i.e., Ni2+ in this case). The resulting metastable reduced Ruddlesden-Popper structures offer a testbed for further studying emerging phenomena in nickel-based oxides.

Modulating Magnetism in Ferroelectric Polymer-Gated Perovskite Manganite Films with Moderate Gate Pulse Chains.

Most previous attempts on achieving electric-field manipulation of ferromagnetism in complex oxides, such as La0.66Sr0.33MnO3 (LSMO), are based on electrostatically induced charge carrier changes through high-k dielectrics or ferroelectrics. Here, the use of a ferroelectric copolymer, polyvinylidene fluoride with trifluoroethylene [P(VDF-TrFE)], as a gate dielectric to successfully modulate the ferromagnetism of the LSMO thin film in a field-effect device geometry is demonstrated. Specifically, through the application of low-voltage pulse chains inadequate to switch the electric dipoles of the copolymer, enhanced tunability of the oxide magnetic response is obtained, compared to that induced by ferroelectric polarization. Such observations have been attributed to electric field-induced oxygen vacancy accumulation/depletion in the LSMO layer upon the application of pulse chains, which is supported by surface-sensitive-characterization techniques, including X-ray photoelectron spectroscopy and X-ray magnetic circular dichroism. These techniques not only unveil the electrochemical nature of the mechanism but also establish a direct correlation between the oxygen vacancies created and subsequent changes to the valence states of Mn ions in LSMO. These demonstrations based on the pulsing strategy can be a viable route equally applicable to other functional oxides for the construction of electric field-controlled magnetic devices.

Phase Diagram and Superconducting Dome of Infinite-Layer Nd_{1-x}Sr_{x}NiO_{2} Thin Films.

Infinite-layer Nd_{1-x}Sr_{x}NiO_{2} thin films with Sr doping level x from 0.08 to 0.3 are synthesized and investigated. We find a superconducting dome x between 0.12 and 0.235 accompanied by a weakly insulating behavior in both under- and overdoped regimes. The dome is akin to that in the electron-doped 214-type and infinite-layer cuprate superconductors. For x≥0.18, the normal state Hall coefficient (R_{H}) changes the sign from negative to positive as the temperature decreases. The temperature of the sign changes decreases monotonically with decreasing x from the overdoped side and approaches the superconducting dome at the midpoint, suggesting a reconstruction of the Fermi surface with the dopant concentration across the dome.

Molecular Beam Epitaxy of Two-Dimensional Vanadium-Molybdenum Diselenide Alloys.

Two-dimensional (2D) alloys represent a versatile platform that extends the properties of atomically thin transition-metal dichalcogenides. Here, using molecular beam epitaxy, we investigate the growth of 2D vanadium-molybdenum diselenide alloys, VxMo1-xSe2, on highly oriented pyrolytic graphite and unveil their structural, chemical, and electronic integrities via measurements by scanning tunneling microscopy/spectroscopy, synchrotron X-ray photoemission, and X-ray absorption spectroscopy (XAS). Essentially, we found a critical value of x = ∼0.44, below which phase separation occurs and above which a homogeneous metallic phase is favored. Another observation is an effective increase in the density of mirror twin boundaries of constituting MoSe2 in the low V concentration regime (x ≤ 0.05). Density functional theory calculations support our experimental results on the thermal stability of 2D VxMo1-xSe2 alloys and suggest an H phase of the homogeneous alloys with alternating parallel V and Mo strips randomly in-plane stacked. Element-specific XAS of the 2D alloys, which clearly indicates quenched atomic multiplets similar to the case of 2H-VSe2, provides strong evidence for the H phase of the 2D alloys. This work provides a comprehensive understanding of the thermal stability, chemical state, and electronic structure of 2D VxMo1-xSe2 alloys, useful for the future design of 2D electronic devices.

Interfacial Oxygen-Driven Charge Localization and Plasmon Excitation in Unconventional Superconductors.

Charge localization is critical to the control of charge dynamics in systems such as perovskite solar cells, organic-, and nanostructure-based photovoltaics. However, the precise control of charge localization via electronic transport or defect engineering is challenging due to the complexity in reaction pathways and environmental factors. Here, charge localization in optimal-doped La1.85 Sr0.15 CuO4 thin-film on SrTiO3 substrate (LSCO/STO) is investigated, and also a high-energy plasmon is observed. Charge localization manifests as a near-infrared mid-gap state in LSCO/STO. This is ascribed to the interfacial hybridization between the Ti3d-orbitals of the substrate and O2p-orbitals of the film. The interfacial effect leads to significant changes in the many-body correlations and local-field effect. The local-field effect results in an inhomogeneous charge distribution, and due to perturbation by an external field, the high polarizability of this nonuniform charge system eventually generates the high-energy plasmon. Transformation of the electronic correlations in LSCO/STO is further demonstrated via temperature-dependent spectral-weight transfer. This study of charge localization in cuprates and interfacial hybridization provides important clues to their electronic structures and superconductive properties.

Anisotropic Collective Charge Excitations in Quasimetallic 2D Transition-Metal Dichalcogenides.

The quasimetallic 1T' phase 2D transition-metal dichalcogenides (TMDs) consist of 1D zigzag metal chains stacked periodically along a single axis. This gives rise to its prominent physical properties which promises the onset of novel physical phenomena and applications. Here, the in-plane electronic correlations are explored, and new mid-infrared plasmon excitations in 1T' phase monolayer WSe2 and MoS2 are observed using optical spectroscopies. Based on an extensive first-principles study which analyzes the charge dynamics across multiple axes of the atomic-layered systems, the collective charge excitations are found to disperse only along the direction perpendicular to the chains. Further analysis reveals that the interchain long-range coupling is responsible for the coherent 1D charge dynamics and the spin-orbit coupling affects the plasmon frequency. Detailed investigation of these charge collective modes in 2D-chained systems offers opportunities for novel device applications and has implications for the underlying mechanism that governs superconductivity in 2D TMD systems.

Electronic Modulation in Site-Selective Occupation of Quasi-2D Triangular-Lattice Cs2CuCl4-xBrx Perovskite Probed by Surface-Sensitive Characterization.

A controllable electronic manipulation in a frustrated magnetic system such as solution-based two-dimensional (2D) all-inorganic perovskites offers a possible route for their integrations with electronic and magnetic devices for their advanced applications. Here, we perform element-specific investigations of an emergent class of quasi-2D all-inorganic perovskites Cs2CuCl4-xBrx with (0 ≤ x ≤ 4) using a combination of synchrotron-radiation photoelectron techniques. Surface- and element-sensitive X-ray absorption spectroscopy spectra of Cu L2,3 edges indicate strong electronic transition that is largely influenced by their halogen content at room temperature. This implies that site-selective occupation largely dominates the electronic transition across the unoccupied states of these series since chlorine atoms possess a stronger electronegative character than bromine atoms. Moreover, the implication of halogen site is reflected in the valence band of Cl-rich copper perovskite in which the valence band edge is closer to Fermi energy (EF) than that of the Br-rich compound. Furthermore, X-ray magnetic circular dichroism spectra of mixed ratio and Br-rich compounds exhibit antiferromagnetism at room temperature. These site-specific magnetic-spectroscopic results are corroborated by density functional theory calculations. The strong electronic modulation and the local magnetic spectroscopy results in these solution-based and low-temperature-growth materials will pave the way toward energy- and cost-efficient perovskite devices.

Three-Dimensional Resonant Exciton in Monolayer Tungsten Diselenide Actuated by Spin-Orbit Coupling.

The intricate features of many-body interactions and spin-orbit coupling play a significant role in numerous physical phenomena. Particularly in two-dimensional transition metal dichalcogenides (2D-TMDs), excitonic dynamics are a key phenomenon that promises opportunities for diverse range of device applications. Here, we report the direct observation of a visible-range three-dimensional resonant exciton and its associated charged exciton in monolayer tungsten diselenide, as compared to monolayer molybdenum disulfide. A comprehensive experimental study that includes high-resolution TEM, Raman, high-resolution spectroscopic ellipsometry over a wide temperature range down to 4 K, high-energy temperature, and excitation power-dependent photoluminescence spectroscopy has been conducted. It is supported by first-principles calculations to unravel the influence of spin-orbit coupling in the formation of the resonant exciton and to identify its in-plane and out-of-plane features. Furthermore, we study the impact of temperature and thickness on the spin-orbit coupling strength in 2D-TMDs. This work is crucial in creating a platform in the fundamental understanding of high-energy resonant exciton in layered two-dimensional systems and that such high-energy optoelectronic features make them an increasingly attractive candidate for novel electronic and optoelectronic applications particularly in the aspects of solar cells and light-emitting diodes via the manipulation of excitonic states.

Tuning the Electronic Structure of LaNiO3 through Alloying with Strontium to Enhance Oxygen Evolution Activity.

The perovskite oxide LaNiO3 is a promising oxygen electrocatalyst for renewable energy storage and conversion technologies. Here, it is shown that strontium substitution for lanthanum in coherently strained, epitaxial LaNiO3 films (La1- x Sr x NiO3) significantly enhances the oxygen evolution reaction (OER) activity, resulting in performance at x = 0.5 comparable to the state-of-the-art catalyst Ba0.5Sr0.5Co0.8Fe0.2O3- δ . By combining X-ray photoemission and X-ray absorption spectroscopies with density functional theory, it is shown that an upward energy shift of the O 2p band relative to the Fermi level occurs with increasing x in La1- x Sr x NiO3. This alloying step strengthens Ni 3d-O 2p hybridization and decreases the charge transfer energy, which in turn accounts for the enhanced OER activity.

Modulation of New Excitons in Transition Metal Dichalcogenide-Perovskite Oxide System.

The exciton, a quasi-particle that creates a bound state of an electron and a hole, is typically found in semiconductors. It has attracted major attention in the context of both fundamental science and practical applications. Transition metal dichalcogenides (TMDs) are a new class of 2D materials that include direct band-gap semiconductors with strong spin-orbit coupling and many-body interactions. Manipulating new excitons in semiconducting TMDs could generate a novel means of application in nanodevices. Here, the observation of high-energy excitonic peaks in the monolayer-MoS2 on a SrTiO3 heterointerface generated by a new complex mechanism is reported, based on a comprehensive study that comprises temperature-dependent optical spectroscopies and first-principles calculations. The appearance of these excitons is attributed to the change in many-body interactions that occurs alongside the interfacial orbital hybridization and spin-orbit coupling brought about by the excitonic effect propagated from the substrate. This has further led to the formation of a Fermi-surface feature at the interface. The results provide an atomic-scale understanding of the heterointerface between monolayer-TMDs and perovskite oxide and highlight the importance of spin-orbit-charge-lattice coupling on the intrinsic properties of atomic-layer heterostructures, which open up a way to manipulate the excitonic effects in monolayer TMDs via an interfacial system.